Product Description
PowerMate 600-3
8‑channel Compact Power‑Mixer
- Mixer with 8 input channels (4 Mic/Line + 2 Mic/Stereo-USB + 2 Stereo-Line)
- Very powerful and reliable amplifier with 2 x 1.000 Watts / 4 Ohms
- 2 High-Quality editable effects, 100 factory and 20 user presets
- Professional 4x4 24-bit / 96 kHz USB interface with MIDI
- Lightweight (9.5 kg) road-ready package with extra robust cover-lid
The PowerMate compact power mixers incorporate profound know-how, based on our research, development and inter-communication with our customers in the professional audio market, for decades.
It incorporates not less than six dedicated audio devices into one compact frame: mixing console, two effects units, graphic equalizer, USB audio interface and power amplifier. Each of them is on the highest quality level as you would expect from a stand-alone device. The PowerMate is a real all-rounder for almost all applications with maximum feature set at minimum size.
The mixing section starts with 6 lowest noise, discrete microphone preamps. 3 auxiliary busses, one of them switchable pre/post fader, allow high flexibility for monitoring. The two effects processors offer 100 factory presets, including the already legendary PowerMate-reverbs. Further, each preset can be edited and stored to 20 User memories.
The built in USB audio interface shares 4 playback and 4 recording channels simultaneously with a PC or Mac, following studio standard 24-bit / 96 kHz. An additional MIDI interface allows integration of instruments, such as keyboards. A license for Steinbergs Cubase software is part of the package.
The 9 band stereo graphic equalizer allows precise tone control for speakers and room matching.
The amplifier is extremely powerful with 2 x 1000 W / 4 Ohms (RMS). Due to modern switching mode power supply technology and a class-D output stage, it’s very efficient and lightweight, too. An optional speaker protection allows limitation of long-term power without giving up dynamics.
Finally, the slim housing is protected by a rugged plastic lid, hold by strong snap in magnets.
SPECIFICATIONS
Channels (Mono + Stereo) | 4 + 4 |
Microphone Inputs (XLR) | 6 |
Auxiliarys (MON, FX, AUX) | 1 Pre, 1 Post, 1 Pre/Post switchable |
SPECIFICATIONS |
Max. Single Channel Output Power, Dynamic-Headroom, IHF-A | |
into 2.66 Ω | 2 x 1600 W |
into 4 Ω | 2 x 1250 W |
into 8 Ω | 2 x 675 W |
Max. Single Channel Output Power, Continuous, 1 kHz, THD = 1% | |
into 2.66 Ω | 2 x 1350 W |
into 4 Ω | 2 x 1150 W |
into 8 Ω | 2 x 650 W |
Maximum Midband Output Power, 1 kHz, THD = 1%, Dual Channel | |
into 2.66 Ω | 2 x 1350 W |
into 4 Ω | 2 x 1000 W |
into 8 Ω | 2 x 600 W |
Rated Output Power, 20 Hz to 20 kHz, THD < 0.5%, Single Channel | |
into 4 Ω | 2 x 900 W |
into 8 Ω | 2 x 450 W |
Maximum Output Voltage, of power amplifier, 1 kHz, no load | 74 Vrms |
THD, at 1 kHz, MBW = 80 kHz | |
MIC input to Master A L/R outputs, +16 dBu, typical | < 0.005% |
POWER AMP INPUTS to Speaker L/R outputs | < 0.075% |
DIM 30, power amplifier, 3.15 kHz, 15 kHz | < 0.05% |
IMD-SMPTE, power amplifier, 60 Hz, 7 kHz | < 0.15% |
Frequency Response, -3 dB, ref. 1 kHz | |
Any input to any Mixer output | 15 Hz to 70 kHz |
Any input to Speaker L/R output | 20 Hz to 30 kHz |
Crosstalk, 1 kHz | |
Amplifier L/R | < -85 dB |
Channel to Channel | < -80 dB |
Mute- & Standby-Switch attenuation | > 100 dB |
Fader & FX/AUX/MON-Send attenuation | > 85 dB |
CMRR, MIC input, 1 kHz | > 80 dB |
Input Sensitivity, all level controls in max. position | |
MIC | -74 dBu (155 µV) |
LINE (Mono) | -54 dBu (1.55 mV) |
LINE (Stereo) | -34 dBu (15.5 mV) |
CD (Stereo) | -34 dBu (15.5 mV) |
POWER AMP INPUTS | +8 dBu (1.95 V) |
Maximum Level, mixing desk | |
MIC inputs | +11 dBu |
Mono Line inputs | +31 dBu |
Stereo Line inputs | +31 dBu |
All other inputs | +22 dBu |
All other outputs | +22 dBu |
Input Impedances | |
MIC | 2 ㏀ |
CD In | 10 ㏀ |
All other inputs | > 15 ㏀ |
Output Impedances | |
Phones | 47 Ω |
All other outputs (balanced/unbalanced) | 150 Ω / 75 Ω |
Equivalent Input Noise, MIC input, A-weighted, 150 ohms | -130 dBu |
Noise, Channel inputs to Master A L/R outputs, A-weighted | |
Master fader down | -100 dBu |
Master fader 0 dB, Channel fader down | -92 dBu |
Master fader 0 dB, Channel fader 0 dB, Channel gain unity | -82 dBu |
Signal/Noise-Ratio, power amplifier, A-weighted, 4 Ω | 105 dB |
Output Stage Topology, amplifier | Class D |
Equalization | |
LO Shelving | ±15 dB / 60 Hz |
MID Peaking | ±12 dB / 2.4 kHz |
HI Shelving | ±15 dB / 12 kHz |
Master EQ 9-band (63, 125, 250, 500, 1k, 2k, 4k, 6.3k, 12kHz) | ±10 dB / Q = 1.5 to 2.5 |
Filter | |
LO-CUT, mono inputs | f = 80 Hz, 18 dB/oct., switchable |
Speaker Processing | LPN, switchable |
Effects | |
Type | 2 x Stereo 24/48-bit multi effects processors |
Effects presets | 100 Factory + 20 User, Tap-Delay |
Remote control | Footswitch, MIDI |
Display | 128 x 64 pixels, OLED |
Digital Audio Interface | |
Channels | 4 In / 4 Out |
AD/DA Conversion | 24-bit |
Sampling Rate | 44.1 / 48 / 88.2 / 96 kHz |
PC Interface | USB2.0, Female Type B |
Peak Display | 6 dB before Clip |
MIDI Interface | 5-pin DIN connector, In / Out |
Output Power Control (Speaker Protection) | Adjustable longterm RMS Limiter |
Protection | |
Mixer Outputs, relay controlled | AUX, MON, MASTER A L/R |
Amplifier | Audio Limiters, High Temperature, DC, HF, Short Circuit, Peak Current Limiters, Turn-on Delay, Back EMF |
Switching Mode Power Supply (µC controlled) | Inrush Current Limiters, Mains Over/Undervoltage, Mains Over Current, High Temperature |
Cooling | Continuous speed controlled Fans |
Phantom Power, switchable | 48 V DC |
Power Requirements (SMPS with auto range mains input) | 100 V to 240 V AC, 50 Hz to 60 Hz |
Power Consumption, at 1/8 maximum output power, 4 Ω | 450 W |
Safety Class | I |
Ambient Temperature Limits | +5 °C to +40 °C (40 °F to 105 °F) |
Dimensions (W x H x D), mm | With lid: 438.8 x 161.7 x 362.5 Rack-mount: 483 x 135.8 x 310.3 (7 HU) |
Weight | |
Net Weight, without lid | 9.0 kg |
Net Weight, with lid | 9.5 kg |
Shipping Weight | 12 kg |
Warranty | 36 months |