DBX AFS2

Product Description

HEAR NO EVIL AND SEE NO EVIL.

The AFS² Advanced Feedback Suppression processor has been completely re-designed to take the foundation of the best selling AFS224 and bring it to thte next level. The AFS² now offers the highly-intuitive Wizard function that takes all of the guesswork out of setting up any room. The AFS² also incorporates a completely re-designed Advanced Feeback Supression module. Best of all, the AFS² now provides the user with a full LCD display setup and monitoring.

With its powerful DSP module, the AFS² provides all the processing and control necessary for both installation and live use. Ten and twelve filter feedback elimination processors are the de facto standard, but the AFS² offers a dedicated feedback suppression processor that offers up to 24 filters per channel with filter Qs up to 1/80 of an octave. To achieve these staggering numbers dbx utilized their improved AFS technology that had previously only been available in the upper echelon line of products and made it available in this stand-alone processor. In addition to the plethora of feedback suppression filters available, the AFS² also offers selectable modes, live filter lift, and types of filtration, which are all readily available via the intuitive user interface front panel. With all of these state-of-the-art features in place, not only do you hear no evil, but you will now be able to see no evil.

Features:

Wizard Setup Function
Full LCD Display
dbx’s patented (Advanced Feedback Suppression) AFS™ technology
24 Programmable Filters per Channel
Stereo or Dual Independent Channel Processing
Live and Fixed Filter Modes
Selectable Filter Lift Times
Application-specific filter types include: Speech and Music Low, Med and High
Input channel Metering
24 LED per Channel Filter Metering
XLR and TRS Inputs and Outputs

Specifications

Number of Inputs	2
Input Connectors	Female XLR and 1/4” TRS
Input Type	Electronically balanced/unbalanced, RF filtered
Input Impedance	Balanced 50kΩ, Unbalanced 25kΩ
Max input line level	+20 dBu
CMRR	> 40dB, typically >55dB @ 1kHz
Number of Outputs	2
Output Connectors	Male XLR and 1/4” TRS
Output Type	Electronically balanced/unbalanced, RF filtered
Output Impedance	Balanced >120 Ω, Unbalanced >60 Ω
Max Output Level	+20 dBu
A/D Converter	dbx Type IV™ Conversion System
A/D Dynamic Range	>113 dB A-weighted, >110 dB unweighted, 22kHz BW
Type IV Dynamic Range	>119 dB, A-weighted, 22kHz BW; >117 dB, unweighted, 22kHz BW
A/D Conversion	24-bit
Sample Rate	48kHz
D/A Dynamic Range	112 dB A-weighted, 109 dB unweighted
D/A Conversion	24-bit
Dynamic Range	109 dB A-weighted, 106 dB unweighted, 22kHz BW
THD+Noise	0.003% typical at +4 dBu, 1 kHz
Frequency Response	20Hz – 20kHz, +/- 0.5dB
Interchannel Crosstalk	>80 dB typical
Crosstalk input to output	>80 dB
Operating Voltage	100-120VAC 50/60 Hz - EU: 220-240 VAC 50/60 Hz
Power Consumption	9 W
Unit Weight	4.5 lbs. (2.04 kg)
Dimensions	1.75” (H) x 5.75” (D) x 19” (W), 4.4cm (H) x 14.6cm (D) x 48.26cm (W)